|
Address: 91-93 Stanley Rd Ingleburn NSW 2565 | CALL US - 1800 155 233
 |
NEW 3.3m Octagonal size available from September 2021.
Call 1800 155 233 to Pre-Order.
The Lynden is Shelta's mid-sized 2.8m square and 3.3m Octagonal cantilever umbrella. It also shares all the features of the more expensive umbrellas including tilt, 360° degree rotation, and fold-back design.
WE WILL PRICE MATCH!!*Including Freight
The Lynden is a mid sized cantilever umbrella that is perfect for someone on a budget. It shares other Shelta cantilever umbrella features including 360 degree rotation with foot lock, multi pistol grip tilt lock and a quality winder to open and close the canopy. And most importantly, no central pole means you can cast the shade where you need it most.
The Lynden is a very sturdy and well constructed umbrella and is also very well priced. We at Shade Australia highly recommend this excellent domestic cantilever umbrella. The oval shaped yacht mast is aluminium that is powdercoated anthracite and the canopy is manufactured with hard wearing Olefin canvas.
The Lynden is available in two size;
TECHNICAL SPECIFICATIONS
 |
 |
|
| SIZE | 3.3m Oct | 2.8m Squ |
| Area (M2) | 8.05 | 7.85 |
| Mast Size | Oval 75 x 50 mm | |
| Mast | Graphite Powdercoated | |
| Operation | Winder System | |
| Tilt | Variable to 60° | |
| Cover Size | Small | |
| DIMENSIONS (MM) | ||
| A | 3300 | 2800 |
| B | 2600 | 2600 |
| C | 2000 | 2000 |
 |
 |
 |
 |
 |
 |
| Sandstone Texture | Taupe Texture | Toffee Texture (limited stock) | Charcoal Texture | Black | Navy |
*Please note: Colours may vary slightly between screens and the actual product.
The texture finish means that there are two colours woven into the fabric to create a contrast or textured finish. It is very popular because solid colour can tend to look a bit flat whereas the finish textured gives the canopy an extra dimension.
The main pole is shaped like a yacht mast (75 x 50mm) which not only gives it additional strength but also lends a nautical styling to the whole umbrella. The frame itself is made from aluminium and the joints are made from quality aluminium castings. A foot lock and rotate system makes operating the umbrella an easy task. The frame is a grey graphite powdercoated colour.
The Lynden comes ready to install with two included options;
The on ground base requires the use of 6-8 ballast blocks or pavers (not included). These can be easily sourced from a hardware or nursery supply store and need to be 450-500mm square.
The bolt down baseplate can be secured to a concrete slab. It requires 4 anchor bolts which can be supplied by Shade Australia (we recommend and supply Hilti Anchor bolts for their ease of use and strength). Use Hilti HSA-F M8x100mm if you are bolting directly to a 100mm thick reinforced slab. If you have pavers on top of the slab we recommend Hilti HSA-F M8x130mm bolts. .
An optional Small Resin Base is available which adds an extra sense of practicality to the umbrella. This base comes in 4 pieces which simply slot together. Ballast is achieved by filling each section with water.
The Lynden is an excellent mid sized umbrella at a very good price. Of course there are cheaper umbrellas available at other stores but you get what you pay for with cantilever umbrellas so Shade Australia does not sell these. The Lynden is our entry level cantilever and we know that if you look after it you’ll get years of service from this umbrella.
You’ll find additional information about this product by using the Tabs at the top of the page. Of course you’re always welcome to call us during normal business hours on Freecall 1800 155 233.
We generally hold stock of this item at our Ingleburn warehouse but if you need it urgently or are planning to visit us to pick it up, it’s best you contact us so we can ensure that we meet your requirements. If we don’t have the stock on hand we can usually get it in quite quickly.
We ship this product Australia wide with reliable couriers such as TNT.
Once we dispatch an order, we will email you the tracking number. This allows you to track your delivery so you know when it is going to be delivered.
We do our best to ensure your order is packaged securely and arrives safely.
Sure, the umbrella comes fully assembled ready for installation. If you’re bolting the umbrella down to a concrete slab, you need to drill 4 holes and use masonry anchors (not supplied) to bolt it down.
If you order the optional resin base you’ll need to fill it with water before use.
Yes. If you’re bolting down to a concrete slab, we recommend you purchase some anchor bolts from us when you purchase your umbrella. Note, the slab must be 100mm thick and reinforced.
If your installing on-ground, you need to purchase 4 pavers, 45-50cm square.
If you’re purchasing the Small Resin Base you’ll need to fill it with water.
No, we don’t recommend it.
Although it is a strong umbrella and is tolerant of breezy conditions, it is always a good idea to fold it away when not in use in order to avoid wind damage.
The umbrella does come with a polyester protection cover which is relatively lightweight. If you really want to give your new umbrella the best possible protection we recommend you purchase a small cantilever protection cover. This will fit neatly on your new umbrella and give it the best possible protection.
An LED light is also a handy accessory to purchase. It simply clips onto a central drop down arm.
Sure, we love answering our customer's questions. Just call us on 1800 155 233 during normal business hours and we’ll answer any question you have.
The Shelta Lynden comes with a 1 year warranty on the frame and 1 year fade resistant warranty on the fabric.
Warranty is on workmanship. It does not cover umbrellas which are damaged due to wind.
Please note, the standard polyester protection cover provided with the umbrella does not have a warranty. The upgraded O'Bravia cantilever protection cover has a 3 year fade resistant warranty and a 12 month warranty on workmanship.
