Hook-Eye Turnbuckles

Rating:
100% of 100
$12.20
In stock
Only 0 left
SKU
hookeye

316 Grade Stainless Steel
Load Rated
Premium Quality

Fill in your delivery details to check available shipping options and calculate rates for this product

Hook-Eye turnbuckles can be used to tension shade-sails in small to medium sizes. Having a hook allows one of the turnbuckle to be hooked to the shade-sail while the other end is affixed to the eyebolt with a D-Shackle. In this configuration, in the event of a turnbuckle exceeding its Maximum load, the eye of the turnbuckle will open and the sail will fall harmlessly to the ground while the turnbuckle remains attached to the eyebolt.

Our turnbuckles are 316 grade stainless steel.

The design consists of two threaded stainless steel threads one with a hook-end the other an eye-end which screw into a stainless steel forged frame. The screws are opposite so as the steel frame is turned both hooks tension up equally.

Please review the load ratings below to choose the size most suitable for your job.

Hook-Eye Turnbuckles are only recommended for small to medium shade sails and should be rigged in the manner described above using a D-Shackle and Eyebolt with a greater breaking load.

Thread Size

A

L MIN

L MAX

ID

ID2

BREAKING LOAD

10mm

10

255

350

17

15

800kg

12mm

12

320

470

20

18

1400kg


*It is the Purchasers’ responsibility to determine whether the testing procedure and breaking load is suitable for purpose. For shade sails with spans over 10 metres we recommend that the customer seek engineering advice regarding  specific loadings and the suitability of this product.

FINAL COMMENTS

You’ll find additional information about this product by using the Tabs at the top of the page. Of course you’re always welcome to call us during normal business hours on Freecall 1800 155 233.

Write Your Own Review
You're reviewing:Hook-Eye Turnbuckles
Your Rating