You have no items in your shopping cart.
Destination
Enter post code to get shipping estimate
Stainless steel Bow Shackles are a very stylish way to fit shade sails. Their curved design gives an added elegance to fitting a shade sail and are recommended for our Sundance Shade cloth Sail range which features an 'easy slide' corner which a D-Shackle will not fit over.
Our Bow Shackles are all made from high quality AISI 316 Marine Grade Stainless Steel.
A Bow Shackle has two main paths, the body and the pin. The body has an anchor shape (bow) as opposed to a chain shape (commonly called a D-Shackle). Each body shape can be used, depending on the specific application, with a screw pin or bolt-type pin.
In a straight pull load, our Bow Shackles match or exceed the rated loadings of our D-Shackles. However, when the load is pulled from the side the overall strength can be reduced if the load is not centred.
A good tip is to tie a galvanised wire around the shackle pin to ensure that it doesn't work loose over time.
![]() |
|||||
Size |
D |
A |
L1 |
L2 |
BL* |
8mm |
8 |
14 |
32 |
56 |
2500 |
10mm |
10 |
20 |
45 |
70 |
4300 |
12mm |
12 |
24 |
54 |
83 |
6200 |
*It is the Purchasers’ responsibility to determine whether the testing procedure and breaking load is suitable for purpose. For shade sails with spans over 10 metres we recommend that the customer seek engineering advice regarding specific loadings and the suitability of this product. |
You’ll find additional information about this product by using the Tabs at the top of the page.
Of course you’re always welcome to call us during normal business hours on Free-call 1800 155 233.
Product Information | |
---|---|
Overall Value | |
Ease of Ordering |
Product Information | |
---|---|
Overall Value | |
Ease of Ordering |
All our Bow Shackles are high quality AISI 316 Grade Stainless Steel.
Bow Shackles are sized according to the diameter of the bow section rather than the pin size. Never use a shackle if the distance between the eyes is greater than listed in the manufacturers tables.
Do not allow a Bow Shackle to be pulled at an angle as the legs may open. Pack the pin with washers to centre the shackle and ensure the load is pulling from the middle of the pin rather than letting the Bow Shackle tip and the load sit in the corner where the pin joins the bow. Do not use Bow Shackles with bent pins or worn and bent bows.
We generally hold stock of this item at our Ingleburn warehouse but if you need it urgently or are planning to visit us to pick it up, it’s best you contact us so we can ensure that we meet your requirements. If we don’t have the stock on hand we can usually get it in quite quickly.
We ship this product Australia wide with reliable couriers such as TNT and Australia Post.
Once we dispatch an order, we will email you the tracking number. This allows you to track your delivery so you know when it is going to be delivered.
We do our best to ensure your order is packaged securely and arrives safely.